Question 1

Hello, I was wondering if this Case comes with any fans already attached?

Accepted Answer

Yes 1 120mm rear exhaust fan. It comes with a 3-pin and molex power cord so you can pick which you prefer. I had trouble with my molex plug, as one of the pins got detached from the plug, but the 3-pin worked fine.

Question 2

How do I tell where to connect the colored case cables for the system power LEDs? Which color cable goes to which connector on the Motherboard?

Accepted Answer

It will depend on your mainboard. Usually the connectors are labelled on the board (mine was called JFPL or something). The instruction manual that came with your mainboard will have all the information you need in it. It will tell you which pin controls which function (power, LED, reset etc) and their polarity (+/-), just match up the positive and negative ends of the cables (+ to +, - to -) to the pins as diagrammed in the manual and you will be good to go. If the cables aren't marked with +/-. look for a little arrow on the connector, that indicated the positive (+) connection.

Question 3

Could I mount an H60 in this case?

Accepted Answer

Based on what the manufacturer of the h60 says it requires, yes. The case is only required to have a 120mm slot for a fan, and this case has several. Additionally, you should make sure that the socket type of your motherboard/processor configuration matches one of those listed under specifications for the h60. They are called things like, Am2, am3 for amd socket types or lg1155 or lg 1156 for Intel based models, but these are not the only socket types supported.

Question 4

i konw it dosent say you can but a dtx form factor has the same screw holes in the same places as a atx mobo so could i put a dtx mobo in there? is a optiplex gx620 mobo i know its a oem mobo

Accepted Answer

In my experience, if it can get screwed in securely to the case, then you should have no problems. I have this case with an ATX motherboard, and it does the job. I believe DTX form is backwards compatible to ATX form standards, so you should be ok with this combo.

Question 5

does this case come with a PSU?

Accepted Answer

No it does not. Bundled PSUs are typically garbage anyways so you want to pick one out yourself.

Question 6

Is the hdd rack removable for an easier install of the front intake fan? Does the front cover remove easily?

Accepted Answer

Don't worry dude, the front cover snaps right off and it includes special long screws so you can install it from the front.  This is an incredibly versatile case that I've used at least a dozen times.  Super recommend to anyone who needs to save money and not lose quality too much.

Question 7

Will this case fit a graphics card that is 11.22 inches long?

Accepted Answer

No, this case is only designed to fit up to 10.5. I run a GTX 295 which is 10.5 and I have just enough room. For your's to fit, you will have to remove some HDD bays.

Question 8

Is there an SD card slot on this case?

Accepted Answer

No, there is a Sata port (to connect to the mobo), two usb 2.0's and auxiliary for a mic and headphones all on the front of the case.

Question 9

Can I put a PNY VCGGTX7702XPB-OC and/or a Gigabyte Windforce 3X GTX 770 in this case? Length concerns me. Thanks.

Accepted Answer

The case has 10.5 inches of clearance so the PNY would fit but the Windforce would not. Even with the PNY, it will be a tight fit, but if you have modular cables to your PSU, it should be OK as this case has good cable routing. Good case for the money.

Question 10

I had this case for a while now. Wonderful case. But i've recently started to do some case mods, added a HDD or 2 ect... Anyways my question is there ANY way to get replacement rails for the HDD cage? I have four of them, i know it came with more, but -_- can't find more. I REALLY need them for the mods i'm doing and I wouldn't look clean if I put one of the HDD in the 2.5"bay...

Accepted Answer

After a quick Google, it looks like your best bet is to call NZXT.
Some other forums have said the company responds well to requests.
Other than that, I saw Dell had something similar in the OptiPlex series, I think. I think Newegg might even carry them.
HTH

Brand	NZXT
Series	GAMMA Classic Series
Model	GAMA-001BK

Type	ATX Mid Tower
Color	Black
Case Material	Steel
With Power Supply	No
Power Supply Mounted	Bottom
Motherboard Compatibility	ATX, Micro-ATX, BABY AT
Side Panel	without Side Window

120mm Fans	1 x 120mm rear fan
Side Air duct	No

Dimensions	20.00" x 7.48" x 17.68" (W x H x D)
Weight	13.23 lbs.

NZXT GAMMA Classic Series GAMA-001BK Black Steel ATX Mid Tower Computer Case

NZXT GAMMA Classic Series ATX Mid Tower Computer Case

Features

Awards

Gallery

What's in the box

Learn more about the NZXT GAMA-001BK

Customer Reviews of the NZXT GAMA-001BK

Warranty & Returns

Warranty, Returns, And Additional Information

Warranty

Return Policies

Manufacturer Contact Info

External 5.25" Drive Bays	4
Internal 3.5" Drive Bays	7
Expansion Slots	7

Item#: N82E16811146061